top of page
Morrelli & Melvin designed

Specifications

Morelli&Melvin-drawing-fe3.jpeg

Dimensions & Specifications

 

Length: 65' (19.8 m)

LWL: 62.7'   (19.1 m)

Beam: 28.5' (8.7 m)

Dry weight: 30500 lbs.

Maximum draft: 10.2' (3.12 m)

Minimum draft: 24.8"  (.63 m)

Max bridge clearance: 92' 8"

Mast Height: 84' (25.6 m)

Hull material: Kevlar/carbon

Mast material: Carbon

Number of cabins: 4*

Number of heads: 5 (1 of those is in the port bow)

Number of beds: 4 (2 king size + 1 Xlong Twin, + 1 almost queen size) + 4 pipe births (2 of those are in the port bow)

 

* owner has turned one of the cabins into an exercise room + Pipe berths.

​

​

Flooring and Lighting

 

African mahogany in the salon

Cork Marinetedeck 2000 in the cabins

All lights are LED

​

Equipment & Engines

​

  • 2) Yanmar 4JH4AE - 55 HP engines

  • 2) Balmar 70A 24VDC alternators

  • 3 Blade Flexfold propellers

  • Aquadrive couplings on thrust bulkheads

  • 2) Water makers (Spectra 400)

  • 1) Watt&sea hydrogenerator 600W and 

  • 1) 500 W (spare)

  • 2,100 Watts of solar panels (10 Sanyo 200W + Aurinco 100W)

  • 2 4,000W Mastervolt inverters

  • 1) Polar genset 300A, 24V, 7.2 kW

  • Fuel capacity: 200 gal + built-in 120 gal reserve tanks

  • Water capacity: 200 Gal

  • 2 15Ga water heaters

  • Brownies YP25 dive compressor

  • 6 bilge pumps

  • Winslow 8 men life raft

  • AB VL12 dinghy w/ Honda 20HP engine

Construction

​

Hulls: Carbon inner skin, Kevlar/glass outer skin, Corcell sandwich.

 

Cabins: Carbon inner skin, E-glass outer skin, Corcell sandwich bulkheads.

 

Cabin soles: pre-preg carbon/nomex honeycomb sandwich; all secondary taping carbon fiber/epoxy.

 

All laminates vacuum-bagged and postcured Awlgrip 2-part polyurethane paint.

​

​

Electronics

​

  • 2 Furuno auto pilots

  • AIS

  • Icom SSB radio And VHF

  • Furuno DRS4D radar

  • Furuno Navnet TZ (black box)

  • Navnet3D backup chart plotter

  • 4 Furuno RD33 instruments + various other Furuno instruments including: 503; 504, 

  • 2 PC laptops with MaxSea and an extensive array of charts installed.

  • 3 GPS 

  • KVH 150 fleetbroadband

  • Wirie Pro

​

​

Galley

  • 2 drawer 16cf refrigerator

  • 2 drawer 12cf freezer

  • Force 10 gourmet range

  • Trident marine LP gas system

  • Double stainless sinks

  • Large center island

* there is an extra freezer in the bow

Sails, Rigging and Ground Tackle

 

State of the art hull shapes, a powerful sail plan and efficient set up for shorthanded sailing makes this Catamaran a fun sailing vessel and supreme passage maker, and realize up to 30kts sailing speed.

 

SAILS

  • Mainsail: 1400 sq ft 3Di, with 3 reefs (2015)

  • Jib (Solent): 750 sq ft, 3Di (2015)

  • Reacher: 1700 sq ft, 3Di (2015

  • Staysail: 450 sq ft, Spectra

  • Assymetrical Spinnaker: 2600 sq ft, spinnaker cloth (2016 - not used yet)

 

RIGGING

Mast, Boom, Forward Beam and Longeron Prepreg Carbon by Marstrom. The standing rigging was supplied by Marstrom but made by Smart Rigging in the Netherlands.

 

New mainsail batten cars are made by CT battens in New Zealand. Special Staysail and Reacher forestays were also made in New Zealand.

 

SAILING HARDWARE

  • Deck and sailing hardware by Harken and Spinlock

  • Harken - winches, furler, organizers, blocks, tracks, etc.

  • Spinlock - upgraded clutches and jammers

  • Facnor - staysail and reacher furlers

  • Forestay - Harken roller furoing - 12 ton on a nitronic forestay

  • Staysail and reacher - on Facnor FXT-12ton drum furlers with special stays made in New Zealand

 

WINCHES: 7 Harken winches

  • Harken 60 2-speed - 1 at each helm station

  • Harken 70 3-speed - 1 at each helm station

  • Harken 70 3-speed - 2 at the aft cockpit

  • Harken 70 3-speed - 1 at the mast base

 

GROUND TACKLE

  • Windlass: Lewmar v1-6 and Sport windlass model V5

  • Fortress marine Anchor

  • Rocna anchor (88lbs)

  • Spade anchor (100lbs)

  • 82m 7/16" chain and 45m rope on the main rode and 23m chain and 77m of rope on the secondary rode

bottom of page